06-06-06 – T.H. See Afternoon Removed next tile (C127) from the cabinet for documentation. Determined proper Level 2 orientation and mounted the tile in the Level 3 fixture in that orientation. Note that this tile had the left end pretty well broken off from right up to the surface or exposed surface of the tile. This could already be seen in the Level 2 photo documentation of the tile. When mounting in the Level 3 fixture no more aerogel fell from the tile, but one piece on the bottom back side is protruding out noticeably. The unevenness of the tile caused it to lift slightly when pressure was applied to the right end via the Level 3 mounting fixture. Began Depth Profile imaging @ ~ 1:10 Completed Depth Profiles @ ~ 1:50. Convert system for track documentation.
| Notes By: | ndc\cpgonzal | Date: | 06/08/2010 |