Sample C2013,0

Skip to content | Skip to navigation

Site Actions

Site Sections

Breadcrumbs

Home → Stardust → Sample Catalog → Sample C2013,0

Stardust Catalog Sample Information for Sample C2013,0

Information Details

Sample Number: C2013,0 Sample Status: Extracted
Alternate Name: Parent:
Sample Description: Cometary Aerogel Tile
Allocation Status: Reserved at WSF

Subsample List


Sample Description Allocation Status Generic Specific Track Grain Grid

Sample Notes

Sample Name Notes Category
C2013,0 Cell C2013 was removed from the cometary grid on May 18, 2006. Processing
C2013,0 This cell had several small tracks. Processing
C2013,0 Right Front Fiducial – Only goes in about 535 µm. Analysis
C2013,0 C013-T1 – On extreme left end of tile. The terminal particle is not visible in image behind sidewall of fixture. Track measures ~1.2 mm in length fro mwhat can be seen with an EH of ~ 31 and MTW of ~ ... Analysis
C2013,0 C013-T2 – Small, bulbous, bifurcated track with three terminal particles. Length is ~ 400 to 500 µm, depending on which feature is the terminal particle. Terminal particles all ~5 µm. EH is on the ord ... Analysis
C2013,0 24 MAY ‘06 Removed C013 from storage and doing a check for small tracks. JW Processing
C2013,0 C013-T3 – Measures ~ 3.6 mm in length with ~ 20 µm terminal particle visible at bottom of track, if that is the true bottom. Track could extend down another 1115 µm, but that may simply be an aerogel ... Analysis
C2013,0 C013-T4 – ~ 220 µm in length. Analysis
C2013,0 C013-T5 - ~ 1mm in length, bifurcated with terminal particles. Entrance hole on the order of 30 µm in size with max width on the order of 90 µm. Analysis
C2013,0 Central Fiducial - ~ 730 µm in length with terminal particles. Analysis
C2013,0 C013-T7 – Smallish track with several noticeable particles. Track length is length is ~ 60, while all particles are ~ 5 µm or less is size. Analysis
C2013,0 C013-T8 seen on top view by Jack. Track measures ~ 700 µm in length and is bifurcated with terminal particles visible. Entrance hole ~ 50 µm with max width being ~ 95 µm. Analysis
C2013,0 All track / features (e.g., T1) numbers assigned during the Level 3 scanning are to be considered “Temporary” and in do not relate to the “Official” track number that is assigned when a given features ... Processing
C2013,0 Completed 7x & 20x top view mosaics. Processing

Related Documents

No matching documents found for sample C2013,0.