Sample C2102,0

Skip to content | Skip to navigation

Site Actions

Site Sections

Breadcrumbs

Home → Stardust → Sample Catalog → Sample C2102,0

Stardust Catalog Sample Information for Sample C2102,0

Information Details

Sample Number: C2102,0 Sample Status: Extracted
Alternate Name: Parent:
Sample Description: Cometary Aerogel Tile
Allocation Status: Reserved at WSF

Subsample List


Sample Description Allocation Status Generic Specific Track Grain Grid

Sample Notes

Sample Name Notes Category
C2102,0 Cell C2102 was removed from the cometary grid on May 18, 2006. The tile was transferred to the remote storage facility at White Sands, New Mexico. This sample is not available for allocation. Processing
C2102,0 The tile has several small-sized tracks. Processing
C2102,0 All track / features (e.g., T1) numbers assigned during the Level 3 scanning are to be considered “Temporary” and in do not relate to the “Official” track number that is assigned when a given features ... Processing
C2102,0 06-05-06 – TH. See Removed C101 from cabinet and examined Level 2 image. This is the tile that Mike Zolensky requested that I do last since it has a large impact in it and we might keep it. Thus, ret ... Processing
C2102,0 C102-T1 – Nice, classic carrot-shaped track. Extremely deep with an angular length measuring ~ 2900 µm in length. Small particles are scattered along the entire length of this track, especially toward ... Analysis
C2102,0 C102-T2 – Small bulbous track measuring ~ 200 to 250 µm in length. Small terminal particle is visible at the terminus. Analysis
C2102,0 C102-T3 – Nice track measuring ~594 (450) µm from the angle. Easily recognizable terminal particle visible at end of track. The terminal particle is ~ 8 µm across. Entrance hole on the order of 15 µm ... Analysis
C2102,0 C102-T4 – Typical bulbous track with small stylus emanating from the bottom of the bulb. Angular length measures ~ 454 (342) µm in length. Entrance holes is on the order of 20 µm, while the max track ... Analysis
C2102,0 C102-T5 – Short, turnip-shaped track measuring ~ 630 (586) µm at the angular view. Three stubby stylus emanating from bottom of turnip, each possessing a small terminal particle at the end of the trac ... Analysis
C2102,0 C102-T6 – Angular length is ~ 520 for the longest stylus, with the second visible stylus ~ 420 µm in length. Entrance hole is visible and ~ 18 µm across with track max width ~ 75 µm in size. Terminal ... Analysis
C2102,0 C102-T7 – Nice bulbous track located near the rear surface of the tile. Over length in the angular position is ~ 480 µm; entrance hole size is ~28 µm, while max width is ~ 136 µm across. At least thre ... Analysis
C2102,0 C102-T8 – Nice carrot-shaped track with at least three styluses. Max length at angle is ~ 802 µm, with the two short stylus measuring ~ 475 & 368 µm in length from the angular view. Nice terminal part ... Analysis
C2102,0 C102-T9 – Near far right side of tile. One visible stylus sticking out the bottom of the bulb, with an over all length of ~ 510 µm (525 µm FS). Entrance hole opening is ~ 30 µm with max track width ~ ... Analysis
C2102,0 Right Front Fiducial appear to measure on the order of 935 (663 FS) µm from the lower viewing angle. Level sample for perpendicular measurements and compressed vs relaxed Fiducial images, if availabl ... Analysis

Related Documents

File Name Sample Name Description Size File Type
C102 C2102,0 1376768 KB ppt
15ºOffset C2102,0 376320 KB xls
15ºOffset_Penny-Tom C2102,0 376320 KB xls